Are you getting new asphalt paving installed on your residential or commercial property? Fortunately, you don’t have to worry about major disruptions during installation.
The process of asphalt paving installation in Pickering is relatively straightforward. It involves preparing the site for installation, laying down the asphalt layer and then finishing with sealant or other treatments, depending on your preferences.
This article will explain each step in detail, so you know what to expect, and how to ensure a successful asphalt pavement installation in Pickering.
Preparing the Site
Like all paving installations, the site needs to be prepared before any other steps are taken. This includes removing all debris, grading the land as needed, repairing any existing damage to the area, and ensuring that drainage is taken into consideration. If necessary, more soil may need to be brought in to properly level the area.
After the land has been prepared, a base layer of gravel is put down before the asphalt is installed.
Laying Down the Asphalt Layer
Once the site has been adequately prepared, it’s time to lay down the asphalt. This process involves heating up an asphalt mixture and pouring it onto the ground in a thick layer. This asphalt mixture is usually made up of sand, gravel, and bitumen, which binds the other two materials together. The asphalt layer needs to be at least 4 inches thick in order to provide a solid foundation for the pavement.
Finishing With Sealant/Other Treatments
Once the asphalt layer has been installed, it’s important to finish with a sealant or other treatments. The asphalt layer on its own is not enough to ensure long-lasting durability. By finishing the pavement with sealants or other treatments, the asphalt will be protected from damage caused by weather, UV rays, and wear and tear.
Sealants also help to reduce the amount of maintenance required over time, making them a critical part of any asphalt paving installation in Pickering.
Asphalt pavement installation is not a difficult process if you know what to expect. By understanding each step of the process, you can be sure that your asphalt pavement will last for years to come. If you’re looking to have an asphalt paving installation in Pickering, contact us at C. Aurora Paving to discuss your needs and get started on the project today.
With proper preparation, laying down the asphalt layer, and finishing with sealant or other treatments, you can ensure a successful and long-lasting asphalt pavement installation in Pickering.